Bend Glass

the best connection between two points is sometimes a curve, i.e., a precisely bent pane of glass from safeco. we produce glass, max. size 2440*2500(arc) mm (5-19mm), using the cold bending method, a special capability of the glass manufacturer.The forming method is automatic quench transmutation. It needn’t any mold. The bending forming section includes upper and lower transmutation mechanism, upper and lower quenches, quench lifting mechanism, glass conveying rollers, etc. the glass forming depend on the conveying hard roller, when the glass go into bending quench over, the bending quench lift motor will work made the conveying roller form one equal radius mold, so made the flat glass form bending glass, when the glass form finish, the flashboard open quickly, the blow will come to the glass surface made the normal glass to the tempering glass. the glass form finish, the flashboard open quickly, the blow will come to the glass surface made the

The cooling air is blown in from the grid back through heat resistant soft hose.

Cylindrical Bending Radius:

• 5mm & 6mm------------- R≥1000mm
• 8mm------------------------ R≥1200mm
• 10mm & 12mm----------- R≥1500mm
• 15mm & 19mm----------- R≥2000mm
• Bus Glasses
• Car Glasses
• Earth Moving Vehicle Glasses
• Commercial Vehicle Glasses
• Rail & Metro Glasses